Mesh-Dichtung - Hohlgestricke

Hollow knitted gaskets offer maximum elasticity with continuous point-to-point contact while requiring extremely low compression forces. They are available in four versions:

• Round hollow knit
• Round hollow knit with fin
• Double-round
• D-profile

Round Hollow Knit

Art.Nr.	Ø
2307.XXYY.016	1,60
2307.XXYY.024	2,40
2307.XXYY.032	3,20
2307.XXYY.048	4,80
2307.XXYY.064	6,40
2307.XXYY.080	8,00
2307.XXYY.095	9,50
2307.XXYY.111	11,10
2307.XXYY.127	12,70

XX: Grundmaterial, YY: Füller, siehe Materialtabelle Ⓜ

Round Hollow Knit with Fin

Art.Nr.	Height	Width
2305.XXYY.016.095	1,60	9,50
2305.XXYY.024.127	2,40	12,70
2305.XXYY.032.127	3,20	12,70
2305.XXYY.032.159	3,20	15,90
2305.XXYY.048.159	4,80	15,90
2305.XXYY.064.191	6,40	19,10
2305.XXYY.064.254	6,40	25,40
2305.XXYY.080.254	8,00	25,40
2305.XXYY.095.320	9,50	32,00

XX: Grundmaterial, YY: Füller, siehe Materialtabelle Ⓜ

Double-Round

Art.Nr.	Height	Width
2306.XXYY.024.127	2,40	12,70
2306.XXYY.032.127	3,20	12,70
2306.XXYY.032.159	3,20	15,90
2306.XXYY.048.159	4,80	15,90
2306.XXYY.048.191	4,80	19,10
2306.XXYY.064.191	6,40	19,10
2306.XXYY.064.254	6,40	25,40
2306.XXYY.080.254	8,00	25,40
2306.XXYY.095.320	9,50	32,00

XX: Grundmaterial, YY: Füller, siehe Materialtabelle Ⓜ

D-Profil

Art.Nr.	Height	Width
2303.XXYY.032.051	3,20	5,10

XX: Grundmaterial, YY: Füller, siehe Materialtabelle Ⓜ

Ⓜ

Grundmaterial und Ausführung (XXYY)
2002	CuBe
2030	CuBe, verzinnt
2407	Verzinnter, verkupferter Stahl
2202	Edelstahl

Auf Wunsch in 2-lagiger oder 2-fädriger Ausführung erhältlich.

Properties

Compression force approx. 80% lower than with conventional knits with elastomer core
Almost 100% recovery of the original diameter after being compressed by nearly 75%
Good shielding performance
Up to 75% lighter than conventional knits
Very long service life
No moisture absorption

Delivery Form

Supplied endless on rolls

Assembly Examples

		Round knit in a groove with flat cover			Round knit in a groove with contact through a “blade”

		Round knit with fin and attachment by double-sided adhesive tape (attachment also possible using a clamping strip)			Double-round with attachment by double-sided adhesive tape (attachment also possible using screws or clamping strip)

Compression Recovery

A key characteristic of hollow knit is its elasticity. It regains up to 90% or more of its original diameter after repeated compression cycles and compression of up to 75%.

Außen Ø	Verformung % des Außen Ø	Erhohlung in % nach Anpreßzyklen
		100 Zyklen	250 Zyklen	500 Zyklen
1,6 mm	25	100	98	98
	50	98	98	94
	75	98	98	94
2,4 mm	25	100	100	100
	50	98	98	96
	75	92	90	88
3,2 mm	25	96	96	96
	50	96	96	96
	75	96	95	95
4,8 mm	25	98	98	98
	50	98	98	98
	75	89	88	88
6,4 mm	25	100	100	100
	50	100	98	98
	75	97	96	96
8,0 mm	25	100	100	100
	50	100	100	99
	75	100	100	98
9,5 mm	25	98	98	98
	50	98	98	97
	75	95	95	95
11,1 mm	25	100	100	100
	50	100	99	99
	75	100	100	98
12,7 mm	25	100	100	100
	50	98	98	97
	75	98	98	97